Painted sheet: max opening for cabinets, boxes and desk cabinets is 105°.
Stainless Steel: max opening for cabinets, boxes and desk cabinets is 120°.

Send an e-mail to: ufficiotecnico@zanardo.com
We will answer your question as soon as possible.

Yes, it is possible. By request it will be created a back-coupling frame to fix the cabinets.

No, our cabinets are obstruction-free; the hinged doors with lock do come with double-comb locking system.

Yes, it is possible to install a double internal plate (back and front), both side-installation interal plate and front-installation internal plate.

For installations in settings exposed to sudden temperature leaps and settings in contact with salty water, we reccomend to choose AISI 316 Stainless-Steel with joint gasket (product code: DRC911). Stainless-Steel is anticorrosive and it is the most suitable in extreme settings.

You can find QO codes in D93 boxes and VFR cabinets subcategories, based on their dimensions.

Zanardo painted sheet products (painted anccording to our standard painting process) do not undergo alterations on the painting and on the gasket with temperatures form -40°C to +60°C.

We use a solid clear transparent polyester sheet with UV rays protection on both sides, to prevent the yellowing phenomenon.

OUR STANDARD PAINTING PROCESS
AUTOMATIC PAINTING PLANT:
1. Semi-finished products are loaded on a chain overhead belt conveyor at a 1,5 m/min speed.
2. Washing procedure in a 5 m phosphatising tunnel at 90° C with iron phosphates water.
3. 4 m water rinsing tunnel.
4. 3 m pipe-water rinsing tunnel.
5. 3 m final rising tunnel with demineralized water.
6. 10 m dripping tunnel.
7. 15 m bell-shaped oven at 110° C.
8. 20 m chain overhead conveyor for semi-finished cooling process.
9. Automatic painting cabins with electrostatic spray guns for thermosetting powders.
10. Manual retouching cabins for internal parts finishing and for blind sections.
Materials:
Standard products for internal use: thermosetting epoxy-polyester powder paint for internal use.Standard colour RAL7035, textured. Standard products for external use (ON REQUEST): thermosetting polyester powder paint for external use. Standard colour RAL7035, bright.
11. 38m bell-shaped polymerization oven at 180°-200°C (according to different types of paintings).
12. 20 m chain overhead conveyor for semi-finished cooling process.
13. Unloading and warehousing area.
Semi-finished products are sample-tested to check paint thickness, whose values must be between 80 and 120 micron; manufacturers suggest a minimum value of 70 micron.

NEMA RATING

In USA and Canada, degrees of protection are define through a series of tests controlled by underwriters laboratories – UL STANDARD 508 – TYPE; and by national electrical manufacturer association – STANDARD 250- NEMA. Although there is no correspondence, since they include other factors, such as anti corrosion protection and fire resistance, they are compared with IP code.

Our products classification

DEGREE		DESCRIPTION
TYPE 1 NEMA 1	IP 10	MAINLY USED INDOOR. PROTECTION AGAINST CONTACT WITH INTERNAL EQUIPMENT AND AGAINST SOLID DIRT FALLING
TYPE 12 NEMA 12	IP 52	MAINLY USED INDOOR. PROTECTION AGAINST DUST, SOLID DIRT, NON-CORROSIVE LIQUIDS
TYPE 4 NEMA 4	IP 56	BOTH INDOOR AND OUTDOOR USED. PROTECTION AGAINST WIND AND RAIN DUST, DIRECT AND INDIRECT WATER SPRAYS, ICE FORMATION DAMAGES
TYPE 4X NEMA 4X	IP 66	BOTH INDOOR AND OUTDOOR USED. PROTECTION AGAINST CORROSION, WIND AND RAIN DUST, DIRECT AND INDIRECT POWERFUL WATER JETS, ICE FORMATION DAMAGES

The IK degree of protection is against the external mechanical impacts. With this kind of classification you can identify the firmness degree of the electrical device.

IK DEGREE OF ROTECTION, RIF: EN 62208 – EN 62262

DEGREE	DEFINITION	EFFECT
IK01	0,14-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK02	0,20-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK03	0,35-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK04	0,50-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK05	0,70-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK06	1-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK07	2-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK08	5-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK09	10-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE
IK10	20-JOULE IMPACT	CONTAINER’S DEFORMATIONS GUARANTEE THE MAINTENANCE OF THE STATED IP DEGREE

When I apply extra drills on the enclosures.

Zanardo SpA can guarantee IP54 degree of protection applying a thicker special filter certificated NEMA 4 (IP54). This kind of filter can reduce the suction performance slightly.

The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking,[1] classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC).[2][3]
The standard aims to provide users more detailed information than vague marketing terms such as waterproof. The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no data available to specify a protection rating with regard to one of the criteria, the digit is replaced with the letter X. The digit 0 is used where no protection is provided.

ZANARDO PRODUCTS ARE NOW CERTIFIED FOR IP66 DEGREE OF PROTECTION.

degrees of protection classification

 

IP DEGREES OF PROTECTION, RIF: EN 62208 – EN 60529
FIRST NUMBER – LIQUID INGRESS PROTECTION

DEGREE	DEFINITION	EFFECT
IPX1	VERTICAL FALLING DROPS PROTECTION	VERTICALLY FALLING DROPS SHALL HAVE NO HARMFUL EFFECT
IPX2	DRIPPING WATER WHEN TILTED UP TO 15° PROTECTION	VERTICALLY DRIPPING WATER SHALL HAVE NO HARMFUL EFFECT WHEN THE ENCLOSURE IS TILTED AT AN ANGLE UP TO 15° FROM ITS NORMAL POSITION
IPX3	RAIN PROTECTION	WATER FALLING AT ANY ANGLE UP TO 60° FROM THE VERTICAL SHALL HAVE NO HARMFUL EFFECT.
IPX4	WATER SPRAYING PROTECTION	WATER SPLASHING AGAINST THE ENCLOSURE FROM ANY DIRECTION SHALL HAVE NO HARMFUL EFFECT
IPX5	WATER JETS PROTECTION	WATER PROJECTED BY A 6.3 MM DIAMETER NOZZLE AND A 12,5 L/MN CAPACITY FROM ANY DIRECTION SHALL HAVE NO HARMFUL EFFECTS.
IPX6	POWERFULL WATER JETS PROTECTION	WATER PROJECTED BY A 6.3 MM DIAMETER NOZZLE AND A 100 L/MN CAPACITY FROM ANY DIRECTION SHALL HAVE NO HARMFUL EFFECTS.
IPX7	PROTECTION AGAINST TEMPORARY IMMERSION EFFECTS	INGRESS OF WATER IN HARMFUL QUANTITY SHALL NOT BE POSSIBLE WHEN THE ENCLOSURE IS IMMERSED IN WATER UNDER DEFINED CONDITIONS OF PRESSURE AND TIME.
IPX8	PROTECTION AGAINST CONTINUOUS IMMERSION EFFECTS	THE EQUIPMENT IS SUITABLE FOR CONTINUOUS IMMERSION IN WATER UNDER CONDITIONS WHICH SHALL BE SPECIFIED BY REGULATION

 

IP DEGREES OF PROTECTION, RIF: EN 62208 – EN 60529

FIRST NUMBER – SOLID PARTICLE PROTECTION

DEGREE	DEFINITION	EFFECT
IP1X	PROTECTION AGAINST SOLID OBJECT WITH A Ø OF 50 MM OR MORE	THE BACK OF THE HAND OR SPHERICAL OBJECTS WITH MORE THAN 50 MM DIAMETER MUST NOT PASSED THROUGH THE DRILLING ON THE COINTAINER
IP2X	PROTECTION AGAINST SOLID OBJECT WITH A Ø OF 12 MM OR MORE	SPHERICAL OBJECTS WITH MORE THAN 12 MM DIAMETER MUST NOT PASSED THROUGH THE DRILLING ON THE COINTAINER. THE JOINTED TEST FINGER CAN PENETRATE FOR A MAXIMUM LENGTH OF 80 MM
IP3X	PROTECTION AGAINST SOLID OBJECT WITH A Ø OF 2,5 MM OR MORE	SPHERICAL OBJECTS WITH MORE THAN 2,5 MM DIAMETER MUST NOT PASSED THROUGH THE DRILLING ON THE COINTAINER
IP4X	PROTECTION AGAINST SOLID OBJECT WITH A Ø OF 1 MM OR MORE	SPHERICAL OBJECTS WITH MORE THAN 1 MM DIAMETER MUST NOT PASSED THROUGH THE DRILLING ON THE COINTAINER
IP5X	DUST PROTECTION	INGRESS OF DUST IS NOT ENTIRELY PREVENTED, BUT IT MUST NOT ENTER IN SUFFICIENT QUANTITY TO INTERFERE WITH THE SATISFACTORY OPERATION OF THE EQUIPMENT
IP6X	DUST TIGHT	A 20 MBAR DEPRESSION IS CREATED IN THE CONTAINER. NO INGRESS OF DUST